How To Mount The Switch On A Rapid 45 Duct - Cisco Catalyst Micro Series Hardware Installation Manual

Switch Installation
The following sections explain the steps in detail.

How to Mount the Switch on a Rapid 45 Duct

This topic describes the installation procedure for mounting the switch on a rapid 45 duct.
Procedure
Step 1 Cut the front cover of the duct on both sides to make an opening corresponding to the width of the switch.
Step 2
Align and insert the switch in to the opening in the duct such that the four lancing features locks into the
opening on the duct.
Cisco Catalyst Micro Series Switch Hardware Installation Guide
How to Mount the Switch on a Rapid 45 Duct
13