Firewall; Ip Filter - D-Link DWM-312W User Manual

Section 4 - Configuration
The IP Filters page manages LAN users' access to the Internet. It is possible to permit access to the Internet for specified IP addresses within your
LAN or to restrict access for specified IP addresses. You can also define filters for port access.
The currently defined IP filters are displayed in the table. You may define up to 16 IP filtering rules. If you wish to remove a rule, click the corresponding
check box to select it and then click Delete. If you wish to create a new rule, click the Add button.
General Settings
Enable rule
Toggle this switch to enable the rule.
Name
Specify a name for the rule. This name is for reference only and does
not affect functionality.
Action
Choose the action to be taken when the rule is triggered. Choose
Allow or Deny.
Protocol Choose which protocol to which the rule will apply. Choose from TCP/
UDP, TCP, UDP, ICMP, or <All>
IP version Choose if the rule should apply to IPv4 or IPv6.
Direction Choose from LAN to WAN, WAN to LAN, and LAN to Router.
D-Link DWM-312W User Manual

Firewall

IP Filter

95