D-Link DWM-312W User Manual page 100
4g lte m2m router
Hide thumbs
Also See for DWM-312W:
- Quick installation manual (33 pages) ,
- Quick installation manual (45 pages)
Table of Contents
Advertisement
Section 4 - Configuration
Destination IP Address
Set as
Choose Range or single IP address to enter a specific IP address or
ranges for the destination filter. Choose Subnet to specify a subnet
only.
Start/End IPv4/
If you have selected Range or single IP address, specify an IP address
range for the destination filter. To enter a single address, use only the
IPv6 address
Start IPv4/IPv6 address field and leave the End IPv4/IPv6 address
field blank.
Subnet IPv4/IPv6
If you have selected Subnet, specify the destination subnet to filter.
address
Source IP Address
Set as
Choose Range or single IP address to enter a specific IP address or
ranges for the source filter. Choose Subnet to specify a subnet only.
Start/End IPv4/
If you have selected Range or single IP address, specify an IP address
IPv6 address
range for the source filter. To specify a single address, use only the
Start IPv4/IPv6 address field and leave the End IPv4/IPv6 address
field blank.
Subnet IPv4/IPv6
If you have selected Subnet, enter the source subnet to filter.
address
D-Link DWM-312W User Manual
96
Advertisement
Table of Contents
