Routing - D-Link DWM-312W User Manual

Section 4 - Configuration
On this page, you can configure the routing feature and add new routes.
Add route
Enable
Toggle this to enable the routing feature.
Protocol
Choose the protocol used by the static route.
Interface
Choose the interface used by the static route.
Destination Specify the IP address of the destination.
network
Destination Specify the netmask used by the destination IP.
netmask
Gateway Specify the gateway used by the static route.
Metric Specify a metric between 1 and 255.
Table Specify the table which the route should belong to.
D-Link DWM-312W User Manual

Routing

88