Gre - D-Link DWM-312W User Manual

Section 4 - Configuration
Tunnel settings
Name Enter the name of the IP tunnel.
IP address Enter the IP address of the virtual interface the tunnel
will use.
Mask Enter the subnet mask to use on the virtual interface.
Interface Select the interface to use to establish the GRE tunnel.
Remote IP
Enter the IP address of the remote end of the tunnel.
MTU
Specify the Maximum Transmission Unit of the
connection. The default setting is 1400.
Allow traffic
Toggle this to disable traffic over the LAN interface.
GRE -> LAN
Static route settings
Remote LAN IP Enter the IP address to use for the local LAN subnet.
address
Remote LAN mask Enter the IP mask for the remote LAN subnet.
Remote GRE Enter the IP address for the remote GRE interface.
interface IP
address
D-Link DWM-312W User Manual

GRE

52