Section 4 - Configuration
Ports
Destination port
Specify the destination port or ports to which the filter will apply.
Specify multiple ports by separating them with commas. Specify port
ranges by separating the beginning and end of the range with a colon.
Set source port
Toggle this switch to specify source ports to which the filter will apply.
manually
Source port
If Set source port manually has been enabled, specify the source
port to which the filter will apply. Specify multiple ports by separating
them with commas. Specify port ranges by separating the beginning
and end of the range with a colon.
Click Apply when you are done.
D-Link DWM-312W User Manual
97
Need help?
Do you have a question about the DWM-312W and is the answer not in the manual?
Questions and answers