Recommended Torque Specifications; Maintenance - Remlinger Single Roller Harrow Install/Owner’s Manual

Recommended Torque Specifications

SAE Grade No.
Bolt Head
Identification
Bolt Size
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
Roller Bearing Lubrication
• Use a #2 multipurpose lithium grease on the bearings at least once a season or every 150
hours. Pump grease in SLOWLY until old grease and dirt are forced out around seals.
Bearings are shipped pre greased for initial use.
!
It is best to lubricate bearings just prior to prolonged storage. The grease fitting is a press-in
style not a threaded spin-in. Worn fittings may prevent bearings from taking grease.
Replacement Parts
• Before and after each use of the roller attachment thoroughly look over your attachment for
any worn, loose, stressed parts. Preventative maintenance can save time and expense to the
attachment if issues are found before heading to the field.
1-800-537-7370
Remlinger Mfg reserves the right to change pricing or specifications at anytime without notice or obligation
5
Lb - Ft
9 - 11 12 – 15
17 - 20.5 23 – 28
35 – 42
54 – 64
80 - 96 109 - 130
150 – 180 203 - 244
270 – 324 366 – 439
400 – 480 542 – 651
580 - 696 787 – 944
800 – 880 1085 – 1193
1120 – 1240 1519 – 1681
1460 – 1680 1980 – 2278
1940 - 2200 2631 – 2983

Maintenance

N - m Lb - Ft
12 - 15
24 - 29
48 - 57 45 - 54
73 - 87 70 - 84
110 - 132
220 - 264
380 - 456
600 - 720
900 - 1080
1280 - 1440
1820 - 2000
2380 - 2720
3160 - 3560
12
8
N - m
16 - 20
33 - 39
61 - 73
95 - 114
149 - 179
298 - 358
515 - 618
814 - 976
1220 - 1464
1736 - 1953
2468 - 2712
3227 - 3688
4285 - 4827
Manual # - MAN-SRH-DFC-004