Advertisement
L10. Configuration wizard: this is an assisted process to configure the current setup.
This feature is available depending on the version of the Touch Controller
and firmware you are using. This feature is explained with more detail in the
Configuration Wizard chapter.
M.
Calibration tab: calibration process to match the physical touch with the
Operating System digital coordinates.
M1. Screens: select the display where you want to perform the geometric calibration.
M2. Calibrate: Click the button to start the geometric calibration. M3. + Advanced
geometric calibration
M4. Calibration points: Number of points used to perform the geometric calibration.
Please refer to the advanced calibration chapter.
M5. Drag mode: Calibration of Touch sensor smaller than the LCD. Please refer to the
advanced calibration chapter.
M6. Touch Test: Touch Test app.
MULTITOUCH SOLUTIONS
For more exciting multitouch products visit
8
touch screen
www.promultis.info
or call +44 (0) 239 251 2794
Advertisement
