Advertisement
G. Security Pin: a security pin to protect the configured settings.
H. Skin Ultra serial number.
I.
Touch Injection Status: touch injection to the Operating System. This has 3 modes:
ON: Operating system will receive touch events from Skin Ultra. OFF: Operating
system will not receive touch events from Skin Ultra.
STAND-BY: Operating system will temporarily not receive touch events from Skin
Ultra. This way, if you want to adjust some setting you will be able to do it. When you
close 'DISPLAX Connect' the touch injection will be automatically re-enabled and
the STAND-BY status will change to ON. This stand-by status is only active when
'DISPLAX Connect' is open.
J. Hide/show Touch Controller settings.
K. Touch Controller firmware version.
L. Settings tab: 'DISPLAX Connect' configuration settings.
L1. Gain: adjusts the signal strength injected by the Touch Controller on the Touch
Sensor - thicker glasses and bigger Touch Sensors will require a strong signal (higher
GAIN values). Gain values range between 0 and 7.
L2. Threshold: adjusts the threshold level of what is considered a touch. Values vary
between 0 and 50 starting on firmware version 1.5.0. (0 to 15 on firmware version
equal or previous to 1.4.0).
L3. Shield: electromagnetic shielding reduces noises that may exist between the Skin
Ultra and the LCD.
L4. Shielding level: adjusts the level of shielding. Ranges between 1 and 6, with 6 being
the strongest shielding level. The shielding level should be maintained as low
as possible.
L5. Palm: allows the rejection of areas with dimensions larger than a finger, such as a
hand or an arm.
L6. Rejection area: allows the rejection of touches from a hand, arm or other object
placed over the touch sensor.
L7. Sensor: checks the Touch Sensor electrical conditions on rows and on columns to
visualize electromagnetic interferences and permits to enable and disable rows
and columns, and to draw block areas.
L8. Draw block areas: allows disabling the touch on specific Touch Sensor active areas,
where you do not want touch being processed.
MULTITOUCH SOLUTIONS
For more exciting multitouch products visit
7
touch screen
www.promultis.info
or call +44 (0) 239 251 2794
Advertisement
