Assign Ip Addresses To Vlans; Create Route To Default Gateway - Allied Telesis AT-x900-12XT/S Configuration Manual
Os configure basic switching functionality for switchblade x908 and x900 series
Hide thumbs
Also See for AT-x900-12XT/S:
- Software reference manual (1294 pages) ,
- Hardware reference manual (65 pages) ,
- Installation and safety manual (55 pages)
Table of Contents
Advertisement
4. Assign IP addresses to the VLANs
Change to configuring vlan1 by entering the command:
awplus(config-if)#interface vlan1
Assign the IP address and subnet by entering the command:
awplus(config-if)#ip address 192.168.1.1/24
Similarly, configure the other VLANs by entering the commands:
awplus(config-if)#interface vlan2
awplus(config-if)#ip address 192.168.2.1/24
awplus(config-if)#interface vlan3
awplus(config-if)#ip address 192.168.3.1/24
awplus(config-if)#interface vlan4
awplus(config-if)#ip address 192.168.4.1/24
5. Create a route to the default gateway
Return to Global Configuration mode by entering the command:
awplus(config-if)#exit
Then enter the command:
awplus(config)#ip route 0.0.0.0/0 192.168.1.254
Page 9 | AlliedWare Plus™ OS How To Note: Switching
Basic VLAN and IP configuration
Hide quick links:
Advertisement
Table of Contents
