Page 1
Installation Guide Ryton Towel Warmer MR06545W ( h ardwired version )
Page 2
The Ryton Towel Rack is intended for towel warming/drying, auxiliary heating or as a decorative product. The average heat up time is about thirty minutes, but would depend on a ) the size of the unit and b ) the initial temperature of the unit. Typically the unit is programmed to be on an hour before expected use and remain on for an hour afterwards.
Page 3
TECHNICAL SPECIFCATIONS 17.7” Rev 04/11 MODEL# MR06545 ELECTRIC VERSION Element specifications 200W, 110V, 48” cord, 15 5/8” bracket centers UL approved. Hardwire Kit CSA-US (approximate) approved. File ref: 229718 HYDRONIC VERSION Heat ouput 1385 BTU. ½” BSPT tappings. Steel towel warmers should only be used in a closed water system, incorporating a rust inhibitor.
Page 4
INSTALLATION STEPS 1. Check that all the installation pack contents have been received. There should be 2 items as shown below plus optional timer if ordered separately: Timer ( optional ) Brackets Hardwire Kit 2. DISCONNECT POWER SUPPLY. If using a timer, connect timer to power supply. The timer can be placed anywhere in the room ( recommended beside the light switches ) .
Page 5
INSTALLATION STEPS 5. Determine the wall location of larger tube by measuring the brackets attached to towel warmer or by using the spec sheet as a guide. Attach larger tube to wall with hole for locking screw facing down on the bottom brackets and facing up on the top brackets. 6.
Page 6
Damage caused by accident, misuse, abuse, improper installation, improper cleaning or alteration will void the warranty. . Westover, Inc is not responsible for labor charges, installation or other incidental or consequential costs. PLEASE REGISTER THIS PRODUCT ONLINE AT WWW.ARTOS-WESTOVER.COM Item №: MR06545W- Serial №...
Need help?
Do you have a question about the Ryton MR06545W and is the answer not in the manual?
Questions and answers