Artos MC600H Installation Manual

Corinium towel warmer

Advertisement

Corinium Towel Warmer MC600H ( hydronic version )
Corinium Towel Warmer MC600H ( hydronic version )
Corinium Towel Warmer MC600H ( hydronic version )
Corinium Towel Warmer MC600H ( hydronic version )
www.artos-westover.com
Installation Guide
Installation Guide
Installation Guide
Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC600H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Artos MC600H

  • Page 1 Installation Guide Installation Guide Installation Guide Installation Guide Corinium Towel Warmer MC600H ( hydronic version ) Corinium Towel Warmer MC600H ( hydronic version ) Corinium Towel Warmer MC600H ( hydronic version ) Corinium Towel Warmer MC600H ( hydronic version )
  • Page 2 Congratulations! You are the proud owner of a quality towel warmer. ARTOS The Corinium Towel Rack is intended for towel warming/drying, auxiliary heating or as a decorative product. The average heat up time is about thirty minutes, but would depend on: a ) the size of the unit and b ) the initial temperature of the unit.
  • Page 3 TECHNICAL SPECIFCATIONS Rev 05/11 MODEL# MC600 ELECTRIC VERSION Element specifications 300W, 110V, 48” cord, UL approved. See separate technical sheet for details of CSA-US approved hardwire kit. HYDRONIC VERSION Heat ouput 2217 BTU. ½” BSPT tappings. Steel towel warmers should only be used in a closed water system, incorporating a rust inhibitor.
  • Page 4 INSTALLATION STEPS 1. Check that all the installation pack contents have been received. There should be 3 items as shown below: B r a c k e t s V a l v e X 2 2. Determine location of towel warmer and install heating system pipework to proposed towel warmer location.
  • Page 5 INSTALLATION STEPS Bracket Installation ( u se diagram below as a guide ) 2. Insert buffers ( D ) i nto bracket ( B ) . Attach bracket ( B ) t o top and bottom towel rack bars with short bolt ( E ) . Note: position brackets as near to the edge as possible in order to give as much hanging space for the towel as possible.
  • Page 6 INSTALLATION STEPS Valve Installation: ( use Diagram below as a guide ) 7. Thread # 1 male stub into female inlets on bottom of towel warmer using a threadlocking substance. 8. Push # 2 compression fitting onto supply pipe and tighten onto valve body. 9.
  • Page 7 Damage caused by accident, misuse, abuse, improper installation, improper cleaning or alteration will void the warranty. . Westover, Inc is not responsible for labor charges, installation or other incidental or consequential costs. PLEASE REGISTER THIS PRODUCT ONLINE AT WWW.ARTOS-WESTOVER.COM Item : MC600H-...

Table of Contents