Related Manuals for Artos Ryton MR12060P
Summary of Contents for Artos Ryton MR12060P
- Page 1 Installation Guide Ryton Towel Warmer MR12060P ( plug-in version)
- Page 2 The RytonTowel Rack is intended for towel warming/drying, auxiliary heating or as a dec- orative product. The average heat up time is about thirty minutes, but would depend on a ) the size of the unit and b ) the initial temperature of the unit. Typically the unit is programmed to be on an hour before expected use and remain on for an hour afterwards.
- Page 3 TECHNICAL SPECIFCATIONS 23.6” Rev 04/11 MODEL# MR12060 ELECTRIC VERSION Element specifications 300W, 110V, 48” cord, UL approved. Hardwire Kit CSA-US approved. File ref: 229718 21 3/4” bracket centers (approximate) HYDRONIC VERSION Heat output 2305 BTU. ½” BSPT tappings. Steel towel warmers should only be used in a closed water system, incorporating a rust inhibitor.
- Page 4 INSTALLATION STEPS 1. Check that all the installation pack contents have been received. There should be 1 item as shown below plus the towel warmer. Brackets 2. Determine location of towel warmer near an electrical outlet. The towel warmer cord is 4 ’...
- Page 5 INSTALLATION STEPS 5. Determine the wall location of larger tube by measuring the brackets attached to towel warmer or by using the spec sheet as a guide. Attach larger tube to wall with hole for locking screw facing down on the bottom brackets and facing up on the top brackets. 6.
- Page 6 Under the warranty we will provide replacement components or product at our discretion. Westover, Inc is not responsible for labor charges connected with removal or installation. PLEASE REGISTER THIS PRODUCT ONLINE AT WWW.ARTOS-WESTOVER.COM...
Need help?
Do you have a question about the Ryton MR12060P and is the answer not in the manual?
Questions and answers