Artos MR12045H Installation Manual

Ryton towel warmer

Advertisement

Quick Links

www.artos-westover.com
Installation Guide
Ryton Towel Warmer MR12045H
( hydronic version )

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MR12045H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Artos MR12045H

  • Page 1 Installation Guide Ryton Towel Warmer MR12045H ( hydronic version )
  • Page 2 Congratulations! You are the proud owner of a quality towel warmer. ARTOS The Ryton Towel Rack is intended for towel warming/drying, auxiliary heating or as a decorative product. The average heat up time is about thirty minutes, but would depend on: a ) the size of the unit and b ) the initial temperature of the unit.
  • Page 3 TECHNICAL SPECIFCATIONS 17.7” Rev 04/11 MODEL# MR12045 ELECTRIC VERSION Element specifications 300W, 110V, 48” cord, UL approved. Hardwire Kit CSA-US 15 5/8” bracket centers approved. File ref: 229718 (approximate) HYDRONIC VERSION ½” BSPT tappings. Steel towel warmers should only be used in a closed water system, incorporating a rust inhibitor.
  • Page 4 INSTALLATION STEPS 1. Check that all the installation pack contents have been received. There should be 3 items as shown below: Brackets Valve X 2 2. Determine location of towel warmer and install heating system pipework to proposed towel warmer location. Tee off the main circuit to provide a branch circuit for the towel warmer.
  • Page 5 INSTALLATION STEPS Bracket Installation:( u se diagram 1 below as a guide ) 1. Attach the smaller tube to the towel warmer with the smaller bolts provided. 2. Determine the wall location of larger tube by measuring the brackets attached to towel warmer or by using the spec sheet as a guide.
  • Page 6 INSTALLATION STEPS Valve Diagram NOTE: this diagram shows a PX40 angled valve. PX41 straight valves are also available. The same installation steps can be followed, but supply pipes must enter through the floor rather than through the wall. # 1 male stub Valve body #2 compression fitting...
  • Page 7 Damage caused by accident, misuse, abuse, improper installation, improper cleaning or alteration will void the warranty. . Westover, Inc is not responsible for labor charges, installation or other incidental or consequential costs. PLEASE REGISTER THIS PRODUCT ONLINE AT WWW.ARTOS-WESTOVER.COM Item №: MR012045H- Serial №...

This manual is also suitable for:

Mr12045

Table of Contents