Subscribe to Our Youtube Channel
Related Manuals for Artos T-WIN60W
Summary of Contents for Artos T-WIN60W
- Page 1 Installation Guide Windrush Towel Warmer T-WIN60W ( h ardwired version )
- Page 2 USE / GUARANTEE The Denby Towel Rack is intended for towel warming/drying, auxiliary heating or as a decorative product. The average heat up time is about thirty minutes, but would depend on a ) the size of the unit and b ) the initial temperature of the unit.
- Page 3 TECHNICAL SPECIFCATIONS Rev 04/11 MODEL# T-WIN60 ELECTRIC VERSION Element specifications 200W, 110V, 48” cord, UL approved. Hardwire Kit CSA-US approved. File ref: 229718 HYDRONIC VERSION Heat ouput 840 BTU. ½” BSPT tappings. Steel towel warmers should only be used in a closed water system, incorporating a rust inhibitor.
- Page 4 INSTALLATION STEPS 1. Check that all the installation pack contents have been received. There should be 3 items as shown below: Timer Hardwire Kit Installation Pack: 16 wood screws 4 wall plates 12 set screws 1 allen wrench 2. DISCONNECT POWER SUPPLY. Connect timer to power supply. The timer can be placed anywhere in the room ( recommended beside the light switches ) .
- Page 5 INSTALLATION STEPS Diagram 1 6. Feed the wire from the towel warmer through the tube from the hardwire kit, and slide wall plate onto the tube. 7. Connect wire from towel warmer to the wire coming from the timer. Us the instructions provided with timer as a guide.
- Page 6 Damage caused by accident, misuse, abuse, improper installation, improper cleaning or alteration will void the warranty. . Westover, Inc is not responsible for labor charges, installation or other incidental or consequential costs. PLEASE REGISTER THIS PRODUCT ONLINE AT WWW.ARTOS-WESTOVER.COM Item №: T-WIN60W- Serial №...
Need help?
Do you have a question about the T-WIN60W and is the answer not in the manual?
Questions and answers