Download Smartthings App; Android; Ios - Aeotec SmartThings User Manual

2021. 05. 04.
11111
9443
443
39500
37
Check your Router to see if there are any new firmware updates and apply it. Access the internal access
point of your router which should be printed directly on the router somewhere (typically this is 192.168.0.1).
If your hub has trouble connecting to Wi-Fi at the location you wish to install/setup your Smart Home Hub,
you may add a Wi-Fi extender half-way between your hub and your Wi-Fi router to help bridge that gap.
b.

Download SmartThings app

Smart Home Hub primarily will be controlled by app use through a android or iOS smartphone.

Android

1. Open Play Store app.
2. In the search bar, enter "smartthings" and search.
3. Tap on SmartThings app.
4. Select Install.

iOS

1. Open App Store app.
2. In the search bar, enter "Smartthings" and search
3. Tap SmartThings app.
4. Tap the Get button to install.
5. You may need to sign in with your Apple ID to start the download and installation.
6. Ensure that your SmartThings app Local Network is enabled
1. Go to your iOS "Settings" page
2. Tap Privacy
3. Tap Local Network
4. Look for SmartThings, ensure that it is toggled ON (ie. image below)
https://aeotec.freshdesk.com/support/solutions/articles/6000240326
Setup - Smart Home Hub : Aeotec Help Desk
2/7