Wlan Module - HP Envy 17 Maintenance And Service Manual

2. Press down on the module until the side retention clips snap into place (3).

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-6 WLAN module descriptions and part numbers
Description
Intel Wireless Wi-Fi6 AX 201 2 × 2 Wi-Fi + Bluetooth® 5 (non-vPro) (MU-MIMO)
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your
country or region. If you replace the module and then receive a warning message, remove the module to
restore device functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery (see
Remove the WLAN module:
1. Peel back the plastic that covers the antenna cables (1), and carefully disconnect the two antenna cables
from the module (2).
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
To prevent an unresponsive system, replace the wireless module only with a wireless module
(Bottom cover and rubber feet on page
Battery on page 32
(Preparation for disassembly on page
).
Spare part number
L92724-005
31).
31).