Table of Contents
Advertisement
Introduction
Overview
The UP-960/960CE is a monochrome video graphic printer that reproduces images
from video equipment. Large size picture can be printed out quickly and easily
using the following features:
Clear and stable print quality
• High definition, 6.4 dots/mm printing
• 256 gradations of black and white.
• Stable printouts by the temperature compensation technology
• High density printouts using the UPP-210HD printing paper.
Two ways printing direction and two printing size selectable
• The printing direction selector on the front panel enables you to print in vertical
and horizontal directions.
• The printing size control on the front panel enables you to select two kinds of
printing size.
DIP switches to optimize the printer
• You can make printouts with bottom end first or upper part of the screen first by
using the DIRECTION DIP switch.
• Aspect ratio of printouts can be set to 4:3 or 1:1 by using the ASPECT DIP
switch.
• You can change the range to be printed out by using the SCAN DIP switch.
Fast printing
• You can make a single printout in about 10 seconds
• You can make a maximum of 11 copies of the same image continuously.
Automatic video signal discrimination
The type of input video signal (EIA or CCIR) is automatically discriminated and
printed adequately; there is no need to change any switch manually.
Easy and quick paper loading
You can load paper just by opening the door panel with the OPEN/CLOSE button
and placing the paper roll.
32
Introduction
Preparation
Connection
Notes
• Turn off the power to each device before making any connections.
• Connect the AC power cord last.
• Before making connections, see "Important safeguards/notices for use in the
medical environment" on page 30.
Video equipment/
Medical equipment
to video output connector
Supplied coaxial connecting
cable (BNC ˜ BNC)
Connecting cable
(not supplied)
to VIDEO IN
to VIDEO OUT
IN
OUT
VIDEO
a) Connect either the RM-91 remote control
unit or the FS-20 foot switch.
Color/black and white
video monitor
to video input
connector
RM-91 remote control
FS-20 foot switch
unit (not supllied)
a)
(not supllied)
a)
or
to REMOTE
REMOTE
AC IN
to AC IN
Supplied AC power cord
to wall outlet
33
Preparation
Hide quick links:
Advertisement
Table of Contents
