FEATURES AND OPERATION
Paper Roll Replacement
Stirrup Positioning & Adjustment
Pelvic Tilt
Max Roll Size
21" x 3.5" (53cm x 9cm)
Slide rod out of brackets, install new
roll, and reinstall into brackets
1
Pull the stirrups out and unfold.
2
Lift slightly and move left or right to position.
3
Release stirrup to lock into position.
WARNING:
DO NOT SUPPORT THE PATIENT'S ENTIRE
WEIGHT WITH THE STIRRUPS. ENSURE
STIRRUPS ARE PROPERLY LOCKED PRIOR
TO ENGAGING PATIENTS FEET.
1
Lift up the seat and the pelvic tilt rod will
automatically fall into place.
2
To disengage pelvic tilt, lift seat and flip the
lever on either side of the seat back.
ENSURE PELVIC SUPPORT ARM IS LOCKED
AND HANDS ARE NOT UNDERNEATH BUMPER
WHEN LOWERING SEAT SECTION.
9