Controls And Connections - Rear Panel - Taga Harmony Platinum v.3 Series Instruction Manual

Controls and Connections - Rear Panel

Available controls and inputs as well as their placement on the rear panel vary depending on the
model. The above figure shows the Platinum SW-10 v.3 subwoofer rear panel.
Rear Panel:
1. Power Switch [ON (1) and OFF (0)]
2. Fuse
A blown fuse should be only exchanged for exactly the same type as indicated
on the rear subwoofer panel. 4A - the fuse rated voltage and value differ
depending on the electrical voltage selected for your area (AC Select).
The Power Cable should be disconnected!
3. Power Cable Input
4. AC Select Slide Switch
Check Operation to learn more.
5. Power Status LED Indicator
6. Auto Power Switch (ON and AUTO)
7. Crossover Regulator
8. Phase Regulator
9. Volume Regulator
10. LFE input (SUB Input)
11. Low Input: Left and Right
7