Controls and Connections - Rear Panel
7
6
5
4
3
Available controls and inputs as well as their placement on the rear panel may vary depending on the
model. The above figure shows the Thunder SW-15D subwoofer rear panel.
Rear Panel:
1. Power Switch (ON and OFF)
2. Power Cable Input and Fuse
A blown fuse should be only exchanged for exactly the same type as originally
used in this product [5*20 T8A/250V].
The Power Cable should be disconnected!
3. Volume Regulator
4. Crossover Regulator
5. Power Status LED Indicator
6. Operation Mode Switch
7. Phase Switch
8. Low Input: Sub
9. Low Input: Left and Right
10. High Input Speaker Connectors (Left and Right)
11. AC Select Switch
Check „Hooking Up The Subwoofer" for more details.
8
9
10
11
1
2
7