Controls And Displays - Rear Panel - Taga Harmony TSW Series Instruction Manual

Controls and Displays - Rear Panel

8
10
9
3
2
Available controls and inputs as well as their placement on the rear panel vary depending on the
model. The above figure shows the TSW-90 v.4 subwoofer rear panel.
Rear Panel:
1. POWER Switch (ON and OFF)
2. FUSE
Note! A blown fuse should be only exchanged for exactly the same type as indicated on the
rear subwoofer panel. The Power Cable should be disconnected!
3. Power Cable Input
4. CROSSOVER Regulator
5. VOLUME Regulator
6. PHASE Switch
7. LOW INPUT Left/Right and SUB
8. POWER Status LED
9. AUTO POWER Switch (ON and AUTO)
10. HIGH INPUT Connectors (Left and Right)
7
5
4
6
1
7