Advertisement
Hooking Up The Subwoofer
b. Using an Y-type subwoofer cable (1xRCA to 2xRCA) - connect the 2xRCA plugs to the L/R RCA
outputs of your audio equipment and the 1xRCA plug to the Left or Right Low Input on the rear
panel.
Do not let bare wires touch each other or any metal part of this unit,
it can damage this subwoofer and / or audio equipment.
This may void your warranty.
The CROSSOVER adjustment is not active with the LFE input.
All adjustments and filtering of the signal should be set in the audio equipment
configuration.
Check the audio equipment instruction manual for more information.
5. Your subwoofer is ready for operation.
II-b) Y type RCA cable
(1xRCA<--2xRCA)
Choose!
AV receiver, Amplifier etc.
L/R RCA outputs
9
Hide quick links:
Advertisement
