Table of Contents
Advertisement
The VENTS VKP PS Series dryer booster fan has been
specially designed to solve dryer vent problems where
more airflow is needed.
The VENTS VKP PS dryer booster fans assure efficient and
reliable operation. The pre-installed pressure switch
allows the VKP PS fan to run only when it senses that the
dryer is on. The controller cycles the fan until the dryer has
stopped. The fans are fitted with backward curved
centrifugal impeller, which allows lint not to get stuck in
the fan. The VENTS VKP PS fans are driven by powerful
sealed external rotor motor with lifelong bearings and
thermal protection. This powerful combination enables
the VENTS VKP PS fans to deliver exceptional airflow
performances even in long duct runs. The fan's housing is
made of galvanized steel. The external rotor motor on ball
bearings and the backward curved, balanced impeller is
suitable for high pressure application, prevent vibration
and assure quiet operation.
Each set contains:
1. Fan - 1 pc;
2. Manual;
3. Packing box.
Specification:
Voltage: 120 V, 60 Hz
Motor: Single-phase external rotor motor with
backward curvedcentrifugal impellers
Duct compatibility: Ø 5" (125 mm)
Airflow capacity: up to 212 CFM
Power consumption: 67 W
Suitable for working airstreams up to 149 °F
IPX4 protection
Thermal overload protection
Pressure switch, mounting bracket and power cord
included
Fan construction is constantly being improved, that is
why some models can differ slightly from those described
in this manual models.
Fan reference scheme
VKP PS 125
Outlet diameter pipe
Fan type
Examples of identification:
A rectangular shaped in-line fan enclosed in a galvanized
steel case, designed for mounting in ventilation stacks
with diameter of 5" (125 mm), supplied with one inlet pipe
with diameter of 5" (125 mm) VKP PS 125.
Advertisement
Table of Contents
