Table of Contents
Advertisement
To Enable Intel(R) Dual Display Clone Mode
1.
Attach your external monitor to the external monitor port (or TV to the S-
Video-Out Port), and turn it on.
2.
Go to the Graphics Properties control panel (see
Properties" on page B -
3.
Click Intel(R) Dual Display Clone (icon).
4.
Choose which attached device will be Primary or Secondary.
5.
Adjust the settings by clicking the Display Settings (tab) if necessary.
6.
Click Apply (and OK to confirm the settings change) and OK (button).
3) and click Devices (tab).
Intel Video Driver Controls
"Intel Graphics
Figure B - 5
Display Settings
Display Modes B - 9
(Clone)
B
Advertisement
Table of Contents
