Sertek Pc Camera Driver Installation (Winxp) - Alienware Sentia m3400 User Manual

Sertek PC Camera Driver Installation (WinXP)

1. Press the Fn + F10 key combination to power on the PC Camera
module (click Cancel if you see a "New Hardware Found" message) .
2. Insert the PC Camera CD-ROM into the CD/DVD drive.
3. The program will run automatically.
4. Click Install Products.
5. Choose the language you prefer and click OK.
6. Click Next (click Continue Anyway if asked if you want to con-
tinue).
7. When the Found New Hardware Wizard appears click the No, not
this time button, and click Next.
8. Select install the software automatically (Recommended) and click
Next (click Continue Anyway if asked if you want to continue).
9. Click Finish (in the Found New Hardware Wizard) > Finish (in the
InstallShield Wizard) to restart the computer.
10. Run the BisonCap application program from the shortcut on the
desktop, or from the BisonCam item in the Start > Programs/All
Programs menu (if the hardware is turned off use the Fn + F10 key
combination to turn it on again).
Modules & Options
PC Camera 7 - 7
7