Charging Your Fly6 Battery - cycliq Fly6 CE GEN3 User Manual

CHARGING YOUR FLY6 BATTERY

Your Fly6 comes partially charged. Before using it for the first time, please charge the device fully.
To charge:
 Connect your device to a USB power adapter (not supplied) using the supplied USB cable.
 The indicator light will illuminate red showing the device is charging.
 The indicator light will illuminate green when the device is fully charged.
You can charge your Fly6 using the USB cable provided and your computer however this will significantly reduce the rate of charge. For the
quickest charge, use a USB power adapter that supports USB fast charge (5V @ 2.1A).
Note
The Fly6 is 'Fast Charge' compatible and accepts up to 2.1 amps. Accordingly, the time to charge from flat to fully charged varies from 1.5 to 6
hours depending on the method of charging, i.e. mains power USB at 2.1 amps (not supplied) or computer USB (at as little as 0.5A). Battery life
will diminish over time and charge cycles.
Fly6 CE603 User Guide Page 8 of 34