cycliq Fly12 User Manual
Hide thumbs
Also See for Fly12:
- Quick start manual (16 pages) ,
- User manual (35 pages) ,
- Quick start manual (19 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for cycliq Fly12
Summary of Contents for cycliq Fly12
- Page 1 Fly12 User Guide...
- Page 2 Cycliq customer support Master reset 1.17 Caution Index JOIN THE CYCLIQ COMMUNITY Share your videos with the Cycliq community by uploading them to www.cycliq.com/videos where approved videos are automatically entered into regular prize draws. Follow us on social media @Cycliq...
- Page 3 PC/Mac and ensuring the green charge light is displayed before using your device. Identifying parts Default Settings Out of the box your Fly12 powers up with the following settings. Video Resolution 1280x720p @30fps (Solid, Flash, Pulse,Studio)
- Page 4 GeTTInG STARTed Charging the battery Removing the MicroSD card Fly12 can be charged in any of the following ways: To remove the MicroSD card, open the MiscroSD slot and gentle depress the MicroSD card. This will free the card allowing for the card to be removed.
- Page 5 Mounting Fly12 with the supplied universal mount Light: Fly12 can be mounted either above or below your handlebars. Press the power button to cycle through the light modes. To use the universal mount (supplied with your Fly12) follow these simple steps.
- Page 6 AUDIBLE ALERT Visual and audible alerts Recording (Full Power On/Off 4 Steady Flash: Green Fly12 comes fully equipped with a variety of Visual and Charge) Beeps Audible alerts that will help you understand what your Fly12 Recording (3/4 Power On/Off 3 is doing.
- Page 7 If you witness an event that you want to capture and retain when riding, simply press the WiFi button briefly. This will lock the current and previous 5 minute video segment Fly12 will resume the light mode that was active when the device last and prevent overwriting. powered off. See “CycliqPlus manual”...
- Page 8 File Edit Format View Open To make any changes to your Fly12: Open Recent Close Save Connect Fly12 to a PC or mac and locate the Fly12 Duplicate Rename device drive Print Safely eject your memory card/Fly12 Fly12 Open Eject Click on the Fly12 device drive and open the config.txt file...
- Page 9 AdjuST SeTTInGS mAnuALLy Power on your Fly12 briefly, for this change to take effect Formatting the MicroSD card (via config.txt file) You can format the memory card via the config.txt file. CAUTION This will delete all footage from your memory card.
- Page 10 Your Fly12 defaults to “Idle Detection Mode” on. This means that it will auto power off if no movement is detected for 15 If you want to use your Fly12 in a race and no lights are minutes (this is a power saving feature if you forget to power permitted (including the indicator LED), just follow the off your unit).
- Page 11 Save the config.txt file and safely eject your memory card/ TextEdit for Mac) found in your Fly12 main folder Fly12 Change “OPBEEP=0” to “OPBEEP=3, 5 or 10” Power on your Fly12 briefly, for this change to take effect Fly12 File Edit...
- Page 12 TRouBLeSHooTInG TROUBLESHOOTING PROBLEM SOLUTION Fly12 will not • Make sure your Fly12 is fully charged turn on. • Press and Hold the Power Button for 1 second • Perform a master reset (details on page 7) Fly12 will not •...
- Page 13 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Cycliq recommends the following: • Do not look directly at the light.
- Page 14 Index INDEX Alert 6, Identifying Parts Race Mode App 5, 9, 10, Idle Mode 7, 10, 11, Reset 8, 9, Incident Protection 5, 7, Battery 3, 4, 7, Settings 3, 7, 8, 9, Bluetooth 3, Light 3, 5, 6, 7, 10, Troubleshooting 12, Camera Microphone...
- Page 15 WWW.CyCLIQ.Com...
Need help?
Do you have a question about the Fly12 and is the answer not in the manual?
Questions and answers