Using Your Fly6; Tail Light Options - cycliq Fly6 CE GEN3 User Manual

USING YOUR FLY6

Turning on your Fly6
Press and hold the power button (for approximately 3-4 seconds) until the rotating LED bezel illuminates and the 'power on' chime is heard –
then release. Power level 'beeps' will sound, signalling the battery status - see battery level indicators on page 9.
Turning off your Fly6
Press and hold the power button (for approximately 3-4 seconds) until the power level 'beeps' sound (indicating the battery status) and the
power off chime is heard or the LEDS have turned off.

TAIL LIGHT OPTIONS

The following options are available:
 Camera Only mode (tail light off)
 Constant mode High (tail light solid with high intensity)
 Constant mode Low (tail light solid with low intensity)
 Flash mode High (tail light flashing with high intensity)
 Flash mode Low (tail light flashing with low intensity)
 Organic mode (tail light random pattern with variable intensity)
You can cycle through the available tail light options using the Power button.
The available tail light options can be customised via the CycliqPlus app.
Note
To maximise battery life, select a lower intensity tail light option and turn off your Fly6 when not in use. Your tail light mode and intensity will
be remembered when you power off your Fly6. The next time you power on your Fly6 it will resume with the previous tail light mode and
intensity. Consider bicycle light regulations in your area when setting up your tail light.
Fly6 CE603 User Guide Page 15 of 34