Visual And Audio Alerts Summary - cycliq Fly6 CE GEN3 User Manual

VISUAL AND AUDIO ALERTS SUMMARY

LEDS
All LEDs off
Three red flashes of the indicator light
Single solid green indicator light
Single solid red indicator light
Single solid blue indicator light
All bezel LEDs blinking red in unison
Bezel LEDs rotating clockwise (red)
N/A
Bezel LEDs go from top to bottom and back
again on both sides
None
N/A
N/A
N/A
N/A
N/A
See Home Safe Function on page 21
N/A
Tail light (as per options on page 15)
LEDS
Bezel LEDs rotating clockwise (red) & tail
light in High Intensity Pulse (Home safe
mode will be bypassed)
Fly6 CE603 User Guide
(Refer to the diagram on page 15)
AUDIO ALERTS (Volume Dependant)
None
None
None
None
None
Two quick and one longer beep every 12-14
seconds
Optional short beep every 3, 5 or 10 mins
Camera Shutter Sound
Ascending Chime
Descending Chime
4 rapid high pitched beeps
3 rapid high pitched beeps
2 rapid high pitched beeps
1 high pitched beep
3 long high pitched beeps
One long and one very long beep every 60
seconds
3 rapid chirps
N/A
AUDIO ALERTS (Not Volume Dependant)
Constant Repeating Ascending Tone
REASON
Fly6 is off
Fly6 requires recharging
100% charged & Fly6 is connected to a working charger
0-99% charged & Fly6 is connected to a working charger
Bluetooth connected
microSD Card error
Fly6 is recording (sound configured using BEEP INTERVAL)
Still image captured
Fly6 has been turned on
Fly6 has been turned off
75% to <99% charged (only when turning on or off)
50% to <75% charged (only when turning on or off)
25% to <50% charged (only when turning on or off)
12% to <25% charged (only when turning on or off)
Less than 12% charged (only when turning on or off)
Less than 12% charged (during use)
Incident Protection mode triggered
Keeps you visible
REASON
Alarm triggered
Page 16 of 34