RAKwireless RAK7249 Quick Start Manual page 3

Industrial outdoor lora gateway

Hide thumbs Also See for RAK7249:

Step 4: Connecting the Gateway to TTN

The Gateway EUI can be found via the Overview page in the Web UI.

Go to your TTN console (you need to

an account first) and register your

new gateway using the link below:

https://console.thethingsnetwork.org/gateways/register

Make sure to select the "I'm using the legacy packet forwarder" option, before

entering the Gateway EUI.

Select your

Frequency Plan

depending on your location. This should populate the

Router field. Optionally you can choose to enter the Gateway coordinates in the

map's upper right corner and select if the gateway is indoor or outdoor via the

Antenna placement field below the map.

Upon successful registration you should see the following screen:

Your Gateway should now be registered with TTN and you should be able to

forward LoRa packets.

Note: By Default the Gateway is set to connect to TTN (using it as its LoRa

Network server). For detailed information about advanced configuration

options refer to the Configuration Guide via the link:

https://www.rakwireless.com/en/download/LoRa/DIY-Gateway-RAK7249