Table of Contents
Advertisement
Chapter 3 Print from Windows 2000/XP/Server 2003
4
Click the [Next] button.
5
Select [Local Printer] and uncheck [Automatically
detect and install my Plug and Play printer]. Click
[Next].
You can also select [Network Printer] but select [Local
Printer] here even if you use a printer by connecting
to a network.
To configure settings for printers that are plugged
into other computers and shared on the network,
select [Network Printer]. Computers and printers
on the network are located and displayed in tree
format. Select the computer and shared printer to
be used. It may take time to locate depending on the
network environment.
6
Select printer connection port, and then click [Next].
To add a new connection port, select [Create a new
port] and select [Standard TCP/IP Port]
as [Type of port]. Click [Next].
To add an LPR port (Standard TCP/IP Port),
see
"3.5.1 Adding New LPR
You can also change the connection port settings
after finishing installation of the printer driver. See
"3.5 Changing Print
7
Click the [Have Disk] button.
8
Click the [Browse] button.
OG
A
00
3-6
"3.1Checking Connection with
Port".
Port".
Printer". and
Advertisement
Table of Contents
