Table of Contents
Advertisement
Chapter 3 Print from Windows 2000/XP/Server 2003
5
Select [Custom], and then click the [Settings]
button.
6
Under [Protocol], select [LPR]. Enter the logical
printer name in [Queue Name] and turn on (check)
[LPR Byte Counting Enabled] and turn off (uncheck)
[SNMP Status Enabled], and then select [OK].
The logical printer is configured on the printer unit.
The logical printer such as "postscript" is pre-defined.
Use "postscript" as the logical printer name in factory
default settings. Enter "postscript" in lower-case
alphabetic letters. For information about how
to configure the network printer, see the "User's
Guide" that came with the printer.
7
Click the [Next] button.
8
Click on the [Finish] button to complete the wizard.
9
Click the [Close] button to close the [Ports] dialog.
OG
A
01
3-12
Advertisement
Table of Contents
