Pushing And Towing The Motor-Sweeper; Operating The Motor Sweeper - RCm MILLE SK Instruction And Maintenance Handbook

PUSHING AND TOWING THE MOTOR-SWEEPER (FIG.4)
Proceed as follows to push or tow the motor sweeper:
Turn on position A the by-pass lever 1 on the variable delivery pump.
!
Caution!
Never push or tow the machine at speeds above 5 km/h or the hydraulic system could be damaged.
Turn on position B the by-pass lever to re-engage the drive system when ready to start work again.
1
Precautions
• The motor sweeper should only be used by competent and authorised personnel.
• Always remove the key and apply brake 3, Fig. 3 when leaving the motor sweeper unattended.
• Never park the motor sweeper on a slope.
Perform the following checks before operating the motor sweeper:
• Engine oil level 3.
• Engine air fi lter 4.
• Hydraulic fl uid oil level 2.
• Fuel level in tank 1.
1
OPERATING THE MOTOR SWEEPER (FIG.5)
2
4
A
42
B
3