Sweeper Drive System; Maintaining And Adjusting The Drive System - RCm MILLE SK Instruction And Maintenance Handbook

The motor sweeper is driven by a hydrostatic system, which includes a variable delivery pump 1 driven by an internal
combustion engine and an hydraulic motor, which control the front wheel.

Maintaining and adjusting the drive system

• The operating pressure of the drive system is from 40 to 80 bar. (Max. fi xed setting of circuit: 200 bar)
• Forward and reverse direction are selected by pressing on the diff erent sides of drive pedal 2.
Proceed as follows to adjust the neutral position of the drive pedal: release lock nut 3, and turn nut 4 to adjust the load
on the spring one way or the other until the linkage remains centralised and the motor sweeper has no tendency to
move in either direction.
SWEEPER DRIVE SYSTEM (FIG.12)
1
2
49
4
3