Controls And Components - RCm MILLE SK Instruction And Maintenance Handbook

1) Forward and reverse travel pedal
Press on this pedal to control the forward or reverse
speed of the motor sweeper. Release the pedal to take
the sweeper to a standstill.
2) Front fl ap lifting pedal
Press this pedal down to lift the front fl ap in order to pass
it over rubbish which would otherwise be pushed in front
of the machine.
3) Brake pedal
Applies the service and parking brake (drum brakes ope-
rating on the rear wheels).
4) Brush rotation control lever
Position A: brush rotation.
5) Refuse container lifting and lowering
control lever
Position A: container up
Position B: container down
6) Refuse container door control lever
Position A: container door open
Position B: container door closed
7) Accelerator control lever
For regulating the engine speed (max. 2600 rpm) during
operation and transfers.
8) Side brush lifting and lowering lever
Used for lifting the side brushes during transfers or when
the motor sweeper is not operating.
Used for lowering the brushes during the operation.
9) Free indicator
10) Horn button
Sounds the horn when pressed.
11) Main brush lifting and lowering lever
Used for lifting the main brush during transfers or when
the motor sweeper is not operating.
Used for lowering the brush during the operation.
12) Commutator Petrol/LPG
Selects the engine type supply, Petrol or LPG
A = Petrol
B = LPG
13) Hour meter
It indicates the number of worked hours.e.
CONTROLS AND COMPONENTS (FIG.3)
2
11
7
9
A A
B B
12
39
3
1
A A B B
A A A A
4 5 6
8
13
B B