LG GEN2 Series Installation And Operation Manual page 4

- VFD Compressor
- Frost Control
- Rotation Sensor
- Dirty Filter Sensor
- Microprocessor Control
- Unoccupied Recirculation Damper
- Vapor Tight Lights
- Hot Gas Bypass Valve
- Hot Gas Reheat Valve
Factory-Installed Refrigeration System Components----------------------------------------------------------------28
Start-Up - Unit-----------------------------------------------------------------------------------------------------------------29
- Model and Serial Number
- Pre-Start-Up Checklist
- Special Tools Required
- Start-Up Procedure
- Voltage Imbalance
- Start-Up Checklist
Start-Up - Components-----------------------------------------------------------------------------------------------------36
- Fan
- Supply Fan (Plenum Type)
- Fan Wheel Rotation Direction
- Supply/Exhaust Fan
- Vibration
- Discharge Air Temperature Sensor
- Airflow Monitor
- Optional Dirty Filter Switch
Optional Energy Wheel-------------------------------------------------------------------------------------------------------37
- Start-Up
- Drive Belt
- Adjust the Air Seals
- Sequence of Operation
- Maintenance
- Inspection
- Wheel Disassembly
- Cleaning
- Reassembly
- Energy Recovery Wheel Belt
- Energy Recovery Wheel Bearings
- Energy Recovery Wheel - Troubleshooting
Troubleshooting------------------------------------------------------------------------------------------------------------------51
- Alarms
- Microprocessor Controller
- Phase Monitor
- Variable Frequency Drive
- Optional Digital Scroll Compressor Controller
- Unit Refrigeration Circuit