4. Select the desired
Network
ted authentication type.
5. Choose a
WPA Passphrase
6. Select any desired
encryption preferences
7. Click
Apply /
Save.
8. On the left side of the gateway, press the 2.4 GHz button and hold for 4-6 seconds. This enables WPS on the gate-
way.
9. Follow the WiFi connection instructions provided with your client device to connect to the gateway. Use the
name
you selected in Step 3. Then enter the passphrase that you entered in step 5 in the appropriate location on
the network setup screen of your WiFi client device.
Authentication. Make sure that the host devices you intend to use support the selec-
and type it in to this field. You will need this passphrase for step 9.
in the lower three fields.
SSID