Recording By Audio Trigger; Recording A Sample - Alesis Plus User Manual

The block diagram of this configuration is as follows:
FIGURE 4
CONFIGURATION 8
SAMPLING
TRIGGER
TRIGGER
L
R

RECORDING A SAMPLE

There are two ways to record a sample.
sample), the QuadraVerb Plus waits for the incoming audio to trigger recording.
The second method requires the user to initiate recording by pressing the
switch on the front panel.
BYPASS

RECORDING BY AUDIO TRIGGER

1) Press the button. The display will read:
DELAY
This page is primarily for playback and can be bypassed for now.
2) Press the up button three times. The display will then read:
PAGE
3) Press the button to select the Audio Trigger On mode. The display will
VALUE
read:
CONFIGURATION:
SAMPLING
AUDIO MIDI
TRIGGER NOTE
Looping Start
Off On
PITCH
SAMPLING
In the first (the easiest to get a good
SAMPLE PLAYBACK:
ONE SHOT
AUDIO TRIGGER
SAMPLING: OFF
9
9
Length
SAMPLING OUTPUT
DIRECT OUTPUT
L
R