Alesis Plus User Manual page 10

4) Now press the
BYPASS
5) Send a signal to the QuadraVerb Plus. When the first LED (-18dB) lights,
the input signal has passed the audio threshold and recording has begun.
For the best recorded signal, raise the input level control so that the -6dB
LED lights. The signal will be distorted if the red "Clip" LED lights.
RECORDING FROM THE FRONT PANEL
1) Press the button. The display will read:
DELAY
This page is primarily for playback and can be bypassed for now.
2) Press the up button three times. The display will then read:
PAGE
3) Press the button to select the Audio Trigger Off mode. The display will
VALUE
read:
4) Now, when ready to sample, press the
For the best recorded signal, raise the input level control so that the -6dB
LED lights. The signal will be distorted if the red "Clip" LED lights.
AUDIO TRIGGER
SAMPLING: ON
button. The display will read:
WAITING FOR AUDIO
THRESHOLD
SAMPLE PLAYBACK:
ONE SHOT
AUDIO TRIGGER
SAMPLING: ON
AUDIO TRIGGER
SAMPLING: OFF
BYPASS
SAMPLING.................
..
10
10
button. The display will read: