Multi Tap Delay - Alesis Plus User Manual

• AUTO PANNING
automatically pan from side to side (when the outputs are
connected in stereo) at a selected rate and depth.
• TREMOLO MODULATION
effect which automatically varies the volume at a selected
rate and depth, simulating the "Surf Sound" tremolo effect
found on old instrument amplifiers.
• RING MODULATOR - The Ring Modulator is a specialized
amplitude modulator that produces an output that contains
only the sum and difference frequencies of its input
waveforms' harmonics.
metallic, bell-like sounds.
• RESONATORS - A Resonator generates a pitch in addition
to the original input signal, making it possible for a non-
pitched sound to become pitched. There are 5 resonators in
the QuadraVerb Plus.

MULTI TAP DELAY

The Multi Tap Delay is a new type of delay available in the 5 BAND EQ->PITCH-
>DELAY configuration. In this mode, up to 8 taps can be defined in the delay.
The Delay Time, Volume, Panning, and Feedback Amount can be individually
adjusted for each tap.
milliseconds.
The Master Feedback control adjusts the global amount of feedback from all the
taps, and the Mix Delay volume adjusts the amount of delay in the effect output.
The Delay Time is relative to the previous tap, which means that when Tap #1 is
delayed, all of the following Taps are delayed by the same amount as well. The
following illustration shows how the timing of adjacent taps behave when a single
delay time is modified (Tap 2 delay is changed from 250ms to 500 ms in this
example):
FIGURE 7
MULTI TAP DELAYS
A
- Auto Panning allows a signal to
- Tremolo Modulation is an
It is most useful for generating
The cumulative delay time of all 8 taps is 1500
3
3