Alesis Plus User Manual page 12

To play again, repeat steps 2A and 3A.
PLAYBACK FROM AN AUDIO TRIGGER
1) Press the
DELAY
2) Press the "Up"
VALUE
Any incoming audio signal that passes the threshold (makes the -18dB LED
light) will cause the sample to play.
PLEASE NOTE:
• The recorded sample can still be manually played back by pressing the
button.
• "Looping" is not available in the Audio Trigger mode.
• Once a sample is audio triggered, the -18dB LED must turn off before sample
can be re-audio triggered.
PLAYBACK FROM MIDI
It is also possible to MIDI trigger the recorded sample from a MIDI keyboard.
This can happen in two ways. In the first, called MIDI One Shot, when a MIDI
note on is received by the QuadraVerb Plus, the recorded sample will play back
to the selected end of the sample, regardless of how long that the key is
depressed. In the second way, known as MIDI Gated, the sample will stop
playing when the key has stopped being depressed. It is also possible to select
the note on the keyboard that will trigger the sample at its original pitch, as well
as the highest and lowest notes that the QuadraVerb Plus will respond to.
TO SELECT THE MIDI TRIGGER MODE
1) Press the
DELAY
2) Press the "Up" button until the display reads:
PAGE
button. The display will read:
SAMPLE PLAYBACK:
ONE SHOT
button until the display reads:
SAMPLE PLAYBACK:
AUDIO TRIGGER
button. The display will read:
SAMPLE PLAYBACK:
ONE SHOT
12
12
EQ