Alesis Plus User Manual page 6

Pressing the
VALUE
read:
This page selects whether the input signal to Input #1 of the Delay section
is derived either before (Pre) or after (Post) the EQ. This page is also
identical to the original QuadraVerb configuration.
3) Pressing the "Up"
Pressing the
VALUE
(which was selected on the previous page) or the second Delay input
which is dedicated to the output of the Pitch section. This page is also
identical to the original QuadraVerb configuration.
4) Pressing the "Up"
which will read:
Pressing the
VALUE
8.
5) Pressing the "Up"
which will read:
Pressing the
VALUE
in milliseconds.
displayed on the first line. If the cumulative delay time of the 8 taps
exceed 1500 milliseconds (1.5 seconds), the delay time will not be
allowed to increase.
DELAY INPUT 1:
POST EQ
buttons will select the other input choice which will
DELAY INPUT 1:
PRE EQ
button again will select the next page which will read:
PAGE
DELAY INPUT MIX:
1<-00 -> PITCH
buttons will select the mix between Delay Input #1
button again will select the Delay Tap to be edited,
PAGE
TAP NUMBER:
1
buttons will select the desired Tap. The range is 1 to
button again will select the Tap Delay Time page,
PAGE
TAP 1 DELAY TIME:
0125 millisecs
buttons will select the desired Delay Time measured
The tap number selected on the previous page is
6
6