Playing Back A Sample - Alesis Plus User Manual

PLAYING BACK A SAMPLE

There are three ways to play back a recorded sample: from the front panel, from
an audio trigger, or through MIDI.
playback) would normally be used when you want to manually trigger a recorded
sample. Playback from an audio trigger is normally used when replacing one
audio source with a recorded sample, as in the case of replacing a snare drum
on a tape track with a better recorded sample. Playback through MIDI enables a
recorded sample to be played from a MIDI keyboard.
PLAYBACK FROM THE FRONT PANEL
1) Press the
DELAY
One Shot means that once a sample is initiated, it will play until the end of
the sample and then stop.
2) To begin playback, press the
then automatically stop. To playback again, press the
3) The volume of the sample can be increased or decreased by the
control of the QuadraVerb Plus.
1A) If you wish to have the sample play back continuously until told to stop,
press the "Down"
2A) To begin playback, press the
3A) To stop playback, press the
Playback from the front panel (manual
button. The display will read:
SAMPLE PLAYBACK:
ONE SHOT
button. The sample will play to the end and
EQ
button. The display will read:
VALUE
SAMPLE PLAYBACK:
LOOPING
button. The display will then read:
EQ
PUSH EQ TO STOP
SAMPLE PLAYBACK
button again. The display will then read:
EQ
PUSH EQ TO TRIG.
SAMPLE PLAYBACK
11
11
button again.
EQ
OUTPUT