Mounting The Bicycle Carrier Onto The Trailer Tow Bar; Adjustment Of The Quick Lock - EUFAB PREMIUM TG Operating Instructions Manual

5.3 MOUNTING THE BICYCLE CARRIER ONTO THE TRAILER TOW BAR

Park your vehicle on a level surface. Apply the handbrake.
WARNING!
Personal injury or property damage possible due to a damaged bicycle carrier.
Damage to the carrier, e.g. bent parts, cracks or scratches, prevents the safe operation of the carrier.
• Do not attach the bicycle carrier if it is damaged in any way.
WARNING!
Personal injury or property damage due to loss of the bicycle carrier while driving.
A loose or faulty connection between the bicycle carrier and trailer tow bar can lead to the detachment of the bicycle carrier.
• Replace a defective trailer tow bar.
• Clean the trailer tow bar of dirt, dust and grease.
NOTE
There is often a layer of paint on new coupling balls.
For the best possible mounting of the bicycle carrier, this paint coating must be carefully removed. Observe the instructions from the tow bar
manufacturer.
Figure 10: Cleaning the coupling ball
Figure 13: Locking the quick lock
NOTE
Slight signs of pressure on the tow bar ball are normal and do not infl uence the functionality.

5.4 ADJUSTMENT OF THE QUICK LOCK

Only do this if the bicycle carrier cannot be mounted fi rmly to the trailer tow bar, as described in section 5.3, "Mounting the bicycle carrier onto the trailer tow bar".
• Remove the bicycle carrier from the trailer tow bar as described in Section 5.8, "Removing the bicycle carrier from the trailer tow bar"
• Loosen the lock nut a little (Figure 15).
• Screw in the setting screw one quarter of a turn (Figure 15).
• Tighten the locking nut (Figure 16).
• Check that the carrier is now fi rmly positioned on the trailer tow bar, as described in "Mounting the bicycle carrier onto the trailer tow bar". If not, repeat
steps described above.
Figure 15: Adjustment of the quick lock
16
Figure 11: Mounting the bicycle carrier onto the trailer tow bar Figure 12: Closing the quick lock
Figure 14: Fastening the quick lock
Figure 16: Adjustment of the quick lock