3.
Remove the battery from the computer (3).
To insert the battery, reverse the removal procedures.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-3
Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the speakers:
1.
Disconnect the speaker cable from the system board (1).
2.
Disconnect the cable from the ZIF connector on the touchpad (2). You need to move this cable so you can
remove the speaker cable that routes under it.
28
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
25).
Battery on page
26).
Spare part number
M00436-001
25).