Table of Contents
Advertisement
Installation
The replacement diaphragm should be identical in size and grade to the original
diaphragm.
3. If replacing a PTFE diaphragm, then follow these steps.
a) Install the new elastomer backing cushion over the tube nut.
b) Invert the PTFE diaphragm by pressing the center of the diaphragm face with your
c) Engage the threads of the diaphragm into the tube nut by rotating clockwise.
d) Continue rotating the PTFE diaphragm clockwise into the compressor while securing
12
thumbs while holding the edge of the diaphragm with your fingers.
the backing cushion from rotating.
Advantage 2.1 Actuator Installation and Operation Manual
Designed and Manufactured by ITT
Advertisement
Table of Contents
