Wlan Setup - ITS Telecom EKSELANS IPC-S2 User Manual

WLAN Setup

In this section it is possible to activate / deactivate the WiFI network, define the wireless channels, type
of operation.
•
Enable Wireless: Enable / disable WLAN.
•
Band: Wi-Fi protocol with which it is broadcasted.
•
Channel Width: Channel bandwidth.
•
Control Sideband: It cannot be configured.
•
Channel Number: Set the working channel manually (selection of the proposed list), or set to
automatic mode.
•
Data Rate: Wi-Fi connection speed, automatic default.
•
Protecction: Wifi protection, by default disabled.
•
Short GI: By default, enabled this option improves wifi network performance.
•
RF Output Power: Wi-Fi power output.
•
SSID: Identifies the "set" of services with a specific Wi-Fi network.
•
Hide SSID: Tick this option to hide the SSID.
•
Encryption method: Select the encryption type: None, WEP, WPA- PSK, WPA2 –PSK and
Mixed WPA2/WPA –PSK. In the event of selecting an encryption method, it will be necessary
to configure the identification method and password.
ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
USER MANUAL IPC-S2
16