Related Manuals for ITS Telecom EKSELANS IPC 24
Summary of Contents for ITS Telecom EKSELANS IPC 24
- Page 1 USER MANUAL IPC 24 /IPC AC 250020/250021 Slave devices for EKOAX+ ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 · info@ek.plus · www.ek.plus...
-
Page 2: Table Of Contents
USER MANUAL IPC 24/IPC AC TABLE OF CONTENTS Installation ..............................................4 Packaging and accessories ..................................... 4 Hardware features ........................................... 5 IPC 24/IPC AC Installation ......................................7 IPC 24/IPC AC Connection ....................................... 7 Operating the IPC 24/IPA AC ....................................... 8 Preparation IPC 24/ IPC AC for web management ..........................8 Web Management Access ...................................... - Page 3 USER MANUAL IPC 24/IPC AC Firewall ..............................................22 URL Filtering ............................................22 MAC Filtering............................................23 IP Filtering/Port Filter .........................................23 Remote Web Management ....................................24 Proto Filters ............................................24 Service ................................................25 DDNS ............................................... 25 Advance NAT ............................................ 25 Port Forwarding ..........................................26 IGMP .................................................
-
Page 4: Installation
USER MANUAL IPC 24/IPC AC Installation The coaxial internet user unit, IPC 24 and IPC AC model, enables performing a fast and secure internet installation via coaxial cable in combination with the main header-end unit, IPC-M300 model. • IPC 24 or IPC AC packaging and accessories •... -
Page 5: Hardware Features
USER MANUAL IPC 24/IPC AC Hardware features Rear panel IPC 24 IPC AC • CABLE: Radio frequency signal input. • TV: Radio frequency signal output. • Ethernet: LAN1 -LAN4: Ethernet LAN ports to connect a PC directly to the equipment. It can function in router mode. - Page 6 USER MANUAL IPC 24/IPC AC Front panel IPC 24 IPC AC The device has the following status LEDs: IPC 24 • EOC: (Ethernet Over Coaxial): If green, the device is functioning correctly. • CAB: If green with slight flickering, it is functioning correctly. Off, the device is switched off or there is no communication with the head-end device.
-
Page 7: Ipc 24/Ipc Ac Installation
USER MANUAL IPC 24/IPC AC IPC 24/IPC AC Installation The user unit enables accessing the internet, either through a Wi-Fi connection or via connection to a PC to one of the LAN ports of the equipment. It is important to bear in mind that the range of the Wi-Fi network will depend on the location of this user unit. -
Page 8: Operating The Ipc 24/Ipa Ac
USER MANUAL IPC 24/IPC AC Operating the IPC 24/IPA AC Accessing the IPC 24/IPC AC slave device This chapter explains how to access and configure the IPC 24 and IPC AC slave after completing the wiring set up procedure as explained in the previous chapter. This chapter includes the following sections: •... -
Page 9: Web Management Access
USER MANUAL IPC 24/IPC AC Perform a “ping” to the IPC's IP address (by default 192.168.5.1). If the PC receives a correct response to the ping command, this will mean that the connection between the PC and the IPC is correct. Web Management Access Open an internet browser and enter the following IP address: http://192.168.5.1. -
Page 10: Web Management Interface
USER MANUAL IPC 24/IPC AC Web management interface The web management interface will allow for a quick configuration of different functions of the IPCs. Introduction The interface consists of three areas as shown in the previous image: Main menu area Sub area menu Area to show the results. -
Page 11: Status
USER MANUAL IPC 24/IPC AC Status The “Status” section includes submenus which displays different WAN and LAN connection values. Device information Click on the “Device information” section in order to access the following screen: The model, functionality of the model in question, hardware version and software version will be displayed. -
Page 12: Lan Information
USER MANUAL IPC 24/IPC AC LAN Information. It will display different information such as Wi-Fi status, errors and packets sent and received from same, as well as the SSID status and encryption. It will likewise display information as regards the LAN, the MAC of the slave or in the event of having a device connected to its IP and the errors in the packets sent and received. -
Page 13: Nat Status
USER MANUAL IPC 24/IPC AC NAT Status Displays the NAT information. Protocol with the output stack, destination stack and its maximum time. ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 ·... -
Page 14: Network
USER MANUAL IPC 24/IPC AC Network The operating parameters of both the WAN, LAN or WLAN (Wi-Fi) can be configured and managed from this menu. Broadband Setup The Network is configured by default. A new network can be changed, deleted or added. Different WAN connections can be configured to offer various services to users. - Page 15 USER MANUAL IPC 24/IPC AC • VLAN ID: A number to the enabled VLAN can be assigned. • 802.1p: A priority to the VLAN, with 1 being the lowest and 7 highest is assigned. • INTERNET NAME: o TR069: The connection which is used for TR069. o INTERNET: The connection is used for INTERNET, and does not withstand TR069.
-
Page 16: Lan Settings
USER MANUAL IPC 24/IPC AC o PPPoE: Acquiring an IP via PPP protocol, a username and password will be assigned. • Bind Port: Assignment of a door with the WAN service. The default WAN connection for all doors is in Router mode. If a new WAN connection is chosen in Bridge mode, a Router mode door can be assigned/unassigned. - Page 17 USER MANUAL IPC 24/IPC AC Note 1: In the event of changing the LAN IP addresses on the router while it is connected through a browser, the router will be disconnected. It will then be necessary to open a new connection using the new IP address and to enter once again.
-
Page 18: Qos
USER MANUAL IPC 24/IPC AC • DHCP Server: enable/disable the DHCP function. • IP Pool Starting Address: The IP address from which the DHCP server will commence providing IP addresses to network users. • IP Pool Ending Address: End address of the range of IPs supplied by the DHCP server. •... -
Page 19: Wlan2 (Only In Ipc Ac)
USER MANUAL IPC 24/IPC AC WLAN2 (ONLY IN IPC AC) In this section it is possible to enable/disable the 5Ghz Wi-Fi network, specify the Wireless channels, type of operation. • Disable: Enable/disable WLAN. • WMM: Enabling the Wi-Fi Multimedia. This function provides quality of service (QoS) to multimedia applications and prioritises the transfer of this data. -
Page 20: Wlan
USER MANUAL IPC 24/IPC AC WLAN In this section it is possible to enable/disable the Wi-Fi network, specify the Wireless channels, type of operation. • Enable: Enable/disable WLAN. • Network Type: Wi-Fi protocol with which it is broadcasted. • Channel: Set the working channel manually (selection of the proposed list), or set to automatic mode. -
Page 21: Remote Control (Only In Ipc 24)
USER MANUAL IPC 24/IPC AC • Encryption method: Select the encryption type: None, WEP, WPA- PSK, WPA2 –PSK and Mixed WPA2/WPA –PSK. In the event of selecting an encryption method, it will be necessary to configure the identification method and password. Remote Control (ONLY IN IPC 24) The protocol used by operators to remotely configure ADSL routers or cable modems can be enabled/disabled. -
Page 22: Security
USER MANUAL IPC 24/IPC AC Security From this section the several types of security on the equipment can be configured. Firewall The different types of protection can be selected By default: SYN, TCP/UDP PortScan, ICMP, Smuft, Ping of Death, Winnuke. URL Filtering Option which permits adding a filtering table for URLs. -
Page 23: Mac Filtering
USER MANUAL IPC 24/IPC AC MAC Filtering Via this option the MAC filtering can be enabled/disabled. Click the “Add” button to add the desired rules, then "Apply”. IP Filtering/Port Filter Via this option the IP filtering can be enabled/disabled. Click the "Add" button to add the desired rules, then "Apply”. -
Page 24: Remote Web Management
USER MANUAL IPC 24/IPC AC Remote Web Management Enables the configuration of the IP and the port for remote access. Proto Filters Enables the configuration of the IP and the port for remote access. ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés ·... -
Page 25: Service
USER MANUAL IPC 24/IPC AC Service In the "service" section ports can be redirected or different parameters configured such as DDNS, UPNP Setup, among others. DDNS A Dynamic Domain Name System can be undertaken if registered on the websites of the different providers and following the necessary steps. -
Page 26: Port Forwarding
USER MANUAL IPC 24/IPC AC Port Forwarding The destination source address and origin source ports to redirect ports can be added. IGMP Enables to activate as IGMP proxy and IGMP Snooping for multicast package management. ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés ·... -
Page 27: System
USER MANUAL IPC 24/IPC AC System System maintenance menu where to manage access to the equipment, reset or modify the Firmware or language changes. Administration In this section the user and the password to access the device can be modified. Backup /Flash Firmware From this tab a backup and reload (Backup file/Restore file), perform a default reset “Reset router to defaults:”... -
Page 28: Reboot
USER MANUAL IPC 24/IPC AC Reboot This option enables a device reset. To that end click the "Reboot" button which will appear by selecting this option. Diagnosis A web address can be pinged in order to verify that the internet is available on the equipment. Select a Google page given that the webpage which appears by default does not function for web security. -
Page 29: Language
USER MANUAL IPC 24/IPC AC Language Two languages can be selected, that is, English or Chinese. ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 · info@ek.plus · www.ek.plus... -
Page 30: Installation Examples
USER MANUAL IPC 24/IPC AC Installation Examples ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 · info@ek.plus · www.ek.plus... -
Page 31: Characteristics
USER MANUAL IPC 24/IPC AC Characteristics Property Description Consumption <5W Power supply 12V/1A Sizes 160×120×32 mm Working temperature 0℃～50℃ Storage temperature -40℃～85℃ Humidity 10%～90% non-condensing Storage humidity 10%～90% non-condensing ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C 08172 Sant Cugat del Vallés · Barcelona (Spain) Phone: +34935839543 ·...
Need help?
Do you have a question about the EKSELANS IPC 24 and is the answer not in the manual?
Questions and answers