Wiring Guidelines - Siemens SIMATIC 505 PPX:505–6108A User Manual

2.1

Wiring Guidelines

WARNING
!
ATTENTION
!
2-2 Installation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Wiring for these modules consists of wiring for the input or output signal
and wiring user power for the output module. Keep the two types of wiring
separate to prevent noise on the signal wiring. Wiring for the input or
output signal should be shielded, twisted-pair cable (14–24 AWG or
2
0.18–1.5 mm , either stranded or solid-type).
Use wires suitable for at least 75 C. Signal wiring connected to this
module must be rated at least 300 V.
Employer des fils d'alimentation pour au moins 75 C. Le cablage de
signalisation raccordé dans cette boîte doit convenir pour une
tension nominale d'au moins 300 V.
Series 505 Analog I/O Modules User Manual